Powered By Ford
February 09, 2012, 03:58:04 AM *
Welcome, Guest. Please login or register.

Login with username, password and session length
News:
 
   Home   Help Login Register  
Pages: 1   Go Down
  Print  
Author Topic: garage clearout xr4 24v stainless exhaust 24v odds and sods  (Read 389 times)
0 Members and 1 Guest are viewing this topic.
paul302289
Guest
« on: September 05, 2010, 03:08:13 AM »

i have for sale a stainles exhaust from a 24v xr4. it could well do withh sirting out at the front end hence £100.
i also have a few 24v bits knocking around,
botom end   £50.00
heads          £25.00 each (slight issue with one of them, if interesred ask me and i wall explain)
xr4x4 crossmember £25.00
xr4x4 power rack    £35.00
triumph tr8 bonnet  £70.00
1990 mustang 5.0 ho headers (stock) £50.00
1990 mustang ecu  £100
i am also breaking a 12v scorpio esate, all parts for sale except engine ecu etc, too many to list, if interested please ask, thanks,paul
Logged
twinturbo
Donation Member
Full Member
******
Offline Offline

Posts: 438



WWW
« Reply #1 on: September 05, 2010, 03:10:12 AM »

What condition is the power rack in?

TT
Logged

paul302289
Guest
« Reply #2 on: September 05, 2010, 03:21:44 AM »

hi mate, it came off a working uncrashed car and will need a bit of a clean, i drove the car home and it worked fine, hope this helps, paul
Logged
MaxXR
Donation Member
Jr. Member
******
Offline Offline

Posts: 54



« Reply #3 on: September 05, 2010, 03:58:34 AM »


 What bottom end end is it ,BOA OR BOB.  thanks  Max.
Logged
paul302289
Guest
« Reply #4 on: September 05, 2010, 04:26:29 AM »

it's a boa. block, crank, rods and pistons
Logged
MaxXR
Donation Member
Jr. Member
******
Offline Offline

Posts: 54



« Reply #5 on: September 05, 2010, 04:35:51 AM »


 What are the condition of the bores and crank.   What bits are still attached.
Logged
paul302289
Guest
« Reply #6 on: September 05, 2010, 06:17:33 AM »

bores have a light surface rust were it has been sitting around, i would recomend a hone. as for the crank, i have no idea as the whole lot is still bolted together.
there is nothing still atached, it is a block, crank , rods and pistons
Logged
Pages: 1   Go Up
  Print  
 
Jump to:  

Powered by MySQL Powered by PHP Powered by SMF 1.1.16 | SMF © 2011, Simple Machines Valid XHTML 1.0! Valid CSS!
Page created in 0.299 seconds with 19 queries.